A round bezel setting is the simplest way to set a stone. A cabochon set correctly in this way will wait clean, simple and elegant. If you lot're a beginner or new to soldering, this tutorial on how to make bezels and how to set a stone in a bezel will give you lot a full, step-by-step breakdown of the tools yous crave and the techniques to use.

Preparing your bezel strip ready for soldering

Step ane

Summate how long a piece of bezel strip yous need for your stone (Circumference= π multiplied by the bore of the stone), add together a little extra so that you lot can overlap!

Amalgamate your bezel strip.

Wrap the bezel strip around your stone to go out a small overlap.

Ideally, the bezel should grip the stone tightly enough that you can pick information technology upwardly, and information technology holds the stone in place.

Pace ii

Mark the signal where the edges of the bezel overlap, and cut.

Bank check that the bezel fits snugly around the stone.

Using a flat (or pillar) needle file, file the edges of the bezel so they fit perfectly.

No calorie-free should be visible through the join if you hold the bezel up.

Soldering the round bezel setting for a perfect fit

Step three

Flux the articulation of the bezel setting thoroughly, and place a pallion of solder across it.

Recall to employ a harder solder than you'll be using to solder  the bezel onto the base.

Begin with a gentle heat, to avoid the solder jumping. Gently estrus the whole bezel, moving in a circular motion following its shape. As the solder reaches melting betoken, rock the rut across the joint until the solder flows beyond the joint. Use caution as bezel strip can melt very easily.

Quench, pickle and rinse.

Clean up the joint, and smooth information technology using a needle file and emery paper (wrap the latter effectually dowelling for a handy tool for smoothing within rings).

You lot should at present have a smooth, clean bezel.

Step 4

Check the fit past pushing the bezel over the stone.

Using a apartment needle file at a 45 degree angle, file a bevelled border around the bezel's base of operations.

This will assistance the solder flow neatly.

Rub the bezel on a fine course emery newspaper on both sides in a round motility to smoothen.

How to make a bezel setting

Pace 5

Flux the underside of the bezel, and the slice of 0.5mm sheet.

Place the bezel centrally, and place pallions of solder within, at regular intervals.

Heat the whole piece gently at first to "set" the flux. Then movement the flame around the outside and the inside of the sheet argent around the bezel. Avoid heating the bezel itself until the base is nigh at the requisite heat.

As yous see the solder is about to melt, movement the flame in a circular motion to match the bezel shape, to encourage the flow of solder.

Quench, pickle and rinse.

Forming your bezel ring setting

Step 6

Using a piercing saw, cutting the excess border from the bezel. Take care not to take hold of the bezel sides.

Use a needle file and emery paper to smooth whatsoever crude edges, and lightly bevel the base of the bezel loving cup.

You lot should now have a smooth, neat bezel cup ready to solder onto your chosen slice of jewellery.

Use a lower temperature solder to avoid any of the previous joints opening up when heating.

How to gear up a cabochon in a bezel

Step 7

Place the rock into the bezel cup. Ensure it goes in level, and sits flush on the bottom.

Using a burnisher (or bezel roller) ease the bezel over the stone.

For a round rock, start exercise this at the cardinal points- this helps ensure a neat setting, with no "wrinkling" of the bezel.

Using your burnisher (an agate burnisher won't damage the stone), keep smoothing the bezel over the stone.

In one case the stone is firmly set, and the bezel is smoothen, give the piece a last polish. I use a rotary tool and felt points, i to polish with Tripoli, and a concluding smoothen using a separate betoken and rouge.

You should at present accept a slice of jewellery with a polish and make clean bezel fix cabochon.

Demand to stock upwardly on workshop supplies? Accept a expect at our solder supplies and gemstone cabochons and so you can practice how to make a bezel setting and perfect your soldering technique.

Save this for later

Author: Cooksongold